Xe xúc lật CAT 908H - Compact Wheel Loader
Xe ủi, xe gàu xúc CAT 908H - Compact Wheel Loader
Hãng xe công trình Caterpillar đã cho ra đời model CAT 980H dùng để xúc lật, xúc đất đá ngoài công trường, xúc bột sắn, xúc bột bắp… trong các nhà máy thức ăn chăn nuôi. Với thiết kế Compact, xe xúc nhãn hiệu Caterpillar là lựa chọn hàng đầu cho công việc xúc các loại bột với gàu xúc 1.5m3.
Cat® C3.4 Engine
Net Power (SAE J1349) 59 kW 79 hp
Weights
Operating Weight 6465 kg 14,253 lb
Buckets
Bucket Capacities 1.1 – 1.5 m3 1.4 – 2.0 yd3
Dưới đây là thông số kỹ thuật xe xúc CAT 980H
Operating Specifications Tire Size 405/70 R20 Rated Bucket 1.1 m3 1.4 yd3 Capacity Hydraulic Lift 3569 kg 7,868 lb Capacity Breakout force 47 kN 10,566 lb Rated operating 1704 kg 3,756 lb load @ full turn, bucket Straight tipping 4774 kg 10,522 lb load, bucket Full turn static 3408 kg 7,510 lb tipping load, bucket Rackback, 52 Degrees transport position Rated operating 2355 kg 5,190 lb load @ full turn, forks (EN 474-3:2006, firm and level ground, 500 mm (20 in) load center) (80% of FTSTL) Rated operating 1766 kg 3,893 lb load @ full turn, forks (EN 474-3:2006, rough terrain, 500 mm (20 in) load center) (60% of FTSTL) Rated operating 2990 kg 6,590 lb load @ full turn, forks (EN 474-3:2006, firm and level ground, 500 mm (20 in) load center) (transport 100 mm (4 in) above ground) • Specifications shown are for 908H with full fuel tank, 75 kg (165 lb) operator, skid steer loader style coupler and general purpose bucket. Service Refill Capacities Cooling System 24 L 6.3 gal Fuel tank 78 L 20.6 gal Hydraulic system 84 L 22.2 gal Engine Oil 10 L 2.6 gal Buckets Bucket Capacities 1.1-1.5 m3 1.4-2.0 yd3 | Engine Model Cat® Cat C3.4 Gross Power @ 62 kW 83 hp 2,500 rpm Net power @ 59 kW 79 hp 2,500 rpm SAE J1349 Rating 59 kW 79 hp ISO 9249 Rating 60 kW 80 hp EEC 80/1269 Rating 60 kW 80 hp Bore 94 mm 3.7 in Stroke 120 mm 4.7 in Displacement 3.3 L 203 in3 • The Cat C3.4 engine meets Tier 3 emissions regulations. Weights Operating Weight 6465 kg 14,253 lb Transmission Travel Speed 1 7 km/h 4.3 mph Travel Speed 2 20 km/h 12.4 mph High Speed 35 km/h 21.7 mph Cab ROPS SAE J1040 MAY94, ISO 3471-1994 FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II Hydraulic System Main relief 235 bar 3,400 psi 3rd Auxiliary 83 L/min 22 gal/min Flow, Standard 3rd Auxiliary 125 L/min 33 gal/min Flow, High Flow Hydraulic cycle 5 Seconds time – lift Hydraulic cycle 2 Seconds time – dump Hydraulic cycle 4 Seconds time – lower, float Hydraulic cycle 2.5 Seconds time – rack back |
1 Cab Height 2650 mm 8 ft 8 in
2 Ground Clearance 340 mm 13 in
3 Wheelbase 2170 mm 7 ft 1 in
4 Overall Length with Bucket 5760 mm 18 ft 11 in
5 Reach at Max Dump Height 855 mm 2 ft 10 in
6 Dig Depth 95 mm 3.7 in
7 Max Dump Height 2540 mm 8 ft 4 in
8 Load Over Height 3215 mm 10 ft 7 in
9 Hinge Pin at Max Height 3410 mm 11 ft 2 in
10 Departure Angle (degrees) 34°
11 Overall Length with Forks 6150 mm 20 ft 2 in
12 Reach at Ground Level 925 mm 3 ft
13 Max Reach 1445 mm 4 ft 9 in
14 Fork Depth Above Ground 30 mm 1.2 in
15 Fork Height at Max Reach 1525 mm 5 ft
16 Max Fork Height 3300 mm 10 ft 10 in
17 Fork Reach at Max Height 595 mm 1 ft 11 in
18 Turning Radius Over Bucket 4560 mm 15 ft
19 Turning Radius Inside Tire 2080 mm 6 ft 10 in
20 Width Over Bucket 2060 mm 6 ft 9 in
21 Tire Gauge 1570 mm 5 ft 2 in
22 Machine Width 1985 mm 6 ft 6 in
23 Articulation Angle 39°
24 Dump Angle at Max Height 45°
Maximum Material Densities
Based on ISO 7546:1983 and rated operating loads at full turn.
Bucket Type General Purpose Multi Purpose Light Material
Rated Capacity../m3 (yd3) 1.1 (1.4) 0.9 (1.18) 1.5 (1.96)
Dump Height… mm (in) 2540 (100) 2630 (104) 2345 (92)
Maximum Material Density kg/m3 (lb/yd3)
1500 (2,528) 1865 (3,144) 1000 (1,686)
Bucket Width mm (in) 2060 (81) 2060 (81) 2080 (82)
No comments:
Post a Comment